6/18/2023 0 Comments Setting up dx6 for realflight 7![]() ![]() There are two ways to do this: Assign Each Servo to a Different Switch ![]() Once the D/R is programmed and activated, you need a way to toggle it when you want. You can change the percentages later to what helps your flight profile the most. Now, flip all three switches so the display shows 1 for each. Leave the Expo set to INH (which stands for inhibit). To start with, keep all the settings in the 0 position at 100%. ![]() You will notice that they will toggle between 0 and 1. If not, flip the Aileron, Elevator or Rudder switches on the transmitter. ![]() Check to make sure that the number next to AILE, ELEV and RUDD are all set to 0. The screen will look like the picture to the right. ![]()
0 Comments
Leave a Reply. |